Torna al blog
Guide pratiche 2026-11-15 Les Tissées – Curated Fashion Fabrics 4 visualizzazioni

Dyeing Nylon and Polyester With Rit DyeMore: A How-To

Dyeing Nylon and Polyester With Rit DyeMore: A How-To

Learn how to dye synthetic fabric at home with Rit DyeMore, from pre-washing and stovetop dyeing to rinsing and washing—plus how much dye nylon and polyester need.

Start with a fiber check, not a color card

Polyester, acrylic, acetate, nylon and blends containing synthetic fibers are the materials Rit DyeMore is formulated for. If your fabric is cotton, linen or another natural fiber, this is the wrong dye—use Rit All-Purpose Liquid Dye instead.

Once you have confirmed the fiber content, the process is the same for both colors in this guide: pre-wash, build a hot stovetop dyebath, keep the fabric moving, then rinse until the water runs clear. The main variable is how much fabric one bottle will cover.

What one 207 ml (7 oz) bottle covers

  • Rit DyeMore Synthetic Fabric Dye – Peacock Green | 207 ml (7 oz): One 207 ml (7 oz) bottle dyes approximately 1 lb (0.45 kg) of dry polyester fabric. Weigh your dry garment before you start so you know whether one bottle is enough for a solid, even color.
    Rit DyeMore Synthetic Fabric Dye – Peacock Green | 207 ml (7 oz)
    Rit DyeMore Synthetic Fabric Dye – Peacock Green | 207 ml (7 oz)
  • Rit DyeMore Synthetic Fabric Dye – Peacock Green | 207 ml (7 oz): For acetate, acrylic or nylon, one bottle can dye up to 2 lbs (0.9 kg) of dry fabric. Nylon takes more fabric per bottle than polyester, so a lightweight nylon jacket may need less dye than the same weight in polyester.
  • Rit DyeMore Synthetic Fabric Dye – Midnight Navy | 207 ml (7 oz): Rit DyeMore Synthetic Fabric Dye – Midnight Navy | 207 ml (7 oz) follows the same coverage: about 1 lb (0.45 kg) of dry polyester or up to 2 lbs (0.9 kg) of acetate, acrylic or nylon. Coverage is a property of the dye line, not the color, so you can plan the same bottle count for Peacock Green and Midnight Navy.
    Rit DyeMore Synthetic Fabric Dye – Midnight Navy | 207 ml (7 oz)
    Rit DyeMore Synthetic Fabric Dye – Midnight Navy | 207 ml (7 oz)

Stovetop dyeing in five checkpoints

The supplied instructions cover the dyebath itself. Use a stainless-steel pot and keep the fabric moving; still fabric and uneven heat are the usual causes of patchy results.

  1. 1. Pre-wash the fabric: Wash the garment to remove finishes and dirt. Dye cannot reach fiber that is still coated with factory sizing or soil.
  2. 2. Heat the water just below boiling: Heat water on the stovetop to just below boiling in a stainless-steel pot large enough that the fabric can move freely.
  3. 3. Add well-shaken dye and stir: Shake the Rit DyeMore bottle well, add it to the hot water and stir thoroughly before the fabric goes in.
  4. 4. Add wet fabric and stir continuously: Add the wet fabric to the hot dyebath and keep stirring. Maintain the hot temperature and keep the fabric moving for even color.
  5. 5. Remove, rinse and wash: Pull the fabric out when the color is achieved, rinse until the water runs clear, then wash as usual.

Peacock Green or Midnight Navy: choosing your starting shade

Rit DyeMore does not bleach or strip existing color—it adds color on top. That means the starting shade of your garment matters as much as the bottle you choose. A pale polyester blouse will read closer to the bottle color than a mid-tone one.

Peacock Green is a saturated jewel tone that works well for refreshing a faded teal or green piece and for giving a plain white or cream synthetic a strong new identity. Midnight Navy is the more forgiving choice for covering light wear and for garments you want to keep wearable with more of your wardrobe. Both are supplied as 207 ml (7 oz) bottles, so the fiber and weight checks above apply equally.

The two colors in this guide

Where home dyeing gets uneven—and what to do

  • Fabric crowded in the pot: The supplied instructions call for enough water that the fabric can move freely. If the garment is bunched, color will pool in folds.
  • Heat dropping mid-bath: Keep the temperature hot throughout. A pot that cools partway through gives weaker, less consistent color.
  • Stirring only at the start: Continuous stirring is part of the supplied method, not an optional extra. Set a timer and stay with the pot.
  • Skipping the pre-wash: Finishes and dirt block dye uptake. Pre-washing is the first listed step for a reason.

What the supplied instructions do not specify

The supplied product information gives the water temperature as just below boiling and describes continuous stirring, but it does not give a fixed dyeing time—the instruction is to remove the fabric when the color is achieved. Treat the first piece as a test: check the shade against a white towel under daylight rather than judging it in the dyebath.

The supplied information also does not include a salt or fixative quantity for this process, so do not add one on the assumption that it is required. Follow the bottle and the steps above, and if you want a precise custom shade, Rit publishes official color mixing formulas that you can consult before you begin.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo