Back to Blog
How-to Guides 2026-11-21 Les Tissées – Curated Fashion Fabrics 0 views

How to Sew Waterproof Fabric with a Zipper

How to Sew Waterproof Fabric with a Zipper

Learn how to sew waterproof fabric with a zipper for rain gear and outdoor gear. Tips on choosing the right zipper and sewing techniques for a water-resistant finish.

Why Combine Waterproof Fabric with a Waterproof Zipper?

A rain jacket or outdoor bag is only as waterproof as its weakest point. Even the best waterproof fabric can leak through an unprotected zipper opening. That is why pairing a waterproof-coated fabric with a waterproof zipper is a practical step when sewing rain gear, technical outerwear, or everyday accessories that need to resist moisture.

The combination works because both materials are designed to reduce water penetration. The fabric uses a polyurethane (PU) coating to block rain, while the zipper has a waterproof-coated construction that helps seal the closure area. Together, they give your project a much better chance of staying dry in wet conditions.

Materials at a Glance

  • Waterproof Fabric | Sprinkle Ice Cream Cones Print | Oeko-Tex Certified: 100% polyester waterproof fabric with a PU coating, 142 cm (55.9") wide, 220 gsm / 6.5 oz, OEKO-TEX Standard 100 Class I certified. This fabric is lightweight yet durable enough for raincoats, splash pants, backpacks, and accessories. The PU coating provides the water resistance you need for outdoor gear.
    Waterproof Fabric | Sprinkle Ice Cream Cones Print | Oeko-Tex Certified
    Waterproof Fabric | Sprinkle Ice Cream Cones Print | Oeko-Tex Certified
  • #5 Waterproof Open-End Zipper | Tropic Blue: #5 waterproof open-end separating zipper, available in lengths from 40 cm to 80 cm, with a waterproof-coated finish. The open-end design lets the zipper separate fully at the bottom, making it ideal for front-opening jackets and coats. The #5 size is a versatile medium weight commonly used for outerwear and bags.
    #5 Waterproof Open-End Zipper | Tropic Blue
    #5 Waterproof Open-End Zipper | Tropic Blue

How to Sew Waterproof Fabric with a Zipper

Follow these steps to install a waterproof zipper into your waterproof fabric project. The process is similar to installing a standard zipper, but a few adjustments help maintain the water resistance of the finished item.

  1. 1. Choose the correct zipper length: Measure the zipper opening specified by your sewing pattern. Select a zipper length that matches that measurement. The #5 Waterproof Open-End Zipper is available in 40 cm, 50 cm, 60 cm, 70 cm, and 80 cm lengths.
  2. 2. Prepare your fabric pieces: Cut your waterproof fabric according to your pattern. Because the fabric has no stretch, handle it like a woven. Use sharp scissors or a rotary cutter to avoid fraying. The fabric has a maximum shrinkage of 3%, so pre-washing is optional but can be done in cold water (30°C) if desired.
  3. 3. Pin or clip the zipper in place: Place the open-end zipper face down on the right side of the fabric, aligning the zipper tape edge with the seam allowance. Use clips rather than pins to avoid leaving permanent holes in the waterproof coating.
  4. 4. Sew the zipper: Using a standard sewing machine with a zipper foot, stitch close to the zipper teeth. A longer stitch length works well for waterproof fabrics. Sew slowly to prevent the fabric from slipping. Follow the product instructions for the recommended stitch length.
  5. 5. Finish the seam: For extra water resistance, you can apply seam sealing tape to the inside of the zipper seam after sewing. This helps block any moisture that might seep through the needle holes.
  6. 6. Test the zipper function: Open and close the zipper several times to ensure it runs smoothly. The separating bottom should lock securely. If the fabric is thick, you may need to trim the seam allowance near the zipper stops.

Care Tips for Your Finished Project

To keep your waterproof zipper and fabric performing well, machine wash cold (30°C) and do not bleach. Hang to dry rather than using a tumble dryer, as high heat can damage the PU coating. If the fabric needs ironing, iron on low heat on the wrong side only. These simple steps help preserve the water resistance and appearance of your handmade gear.

What This Guide Does Not Cover

This guide covers the basic process of sewing a waterproof zipper into waterproof fabric. It does not include instructions for seam sealing tape application, pattern drafting, or advanced techniques like welded seams. Always check your sewing pattern's zipper requirements before ordering materials.

Related Articles

Customer Service
Home
Products
Cart
Profile